► 1/3 HP - 2 HP ► Removable Bolt-On / Bolt-Off Base► 1800 RPM ► 20:1 Speed Range At Constant Torque► 12 & 24 Volt ► Permanently Lubricated Sealed Ball Bearings► TENV Enclosure (1/3 HP - 1/2 HP) ► High Starting Torque

► TEFC Enclosure (3/4 HP and Up) ► Extra Set Of Brushes And Brush Springs Included

► Class F Insulation ► Used In Applications Where Low Voltage DC Power► 1.15 Service Factor Is Supplied By Batteries Or Generators

WorldWide Electric Stainless Steel Motors Are Specifically Designed To Meet And / Or Exceed All Applications Such As Meat / Packaging, Food Processing, Pharmaceutical And Beverage Processing, As Well As Clean Room And Sanitary Applications Or Where A Motor Is Subject To High Pressure Washdowns.Easy To ReadLaser EtchedNameplateNEMA C FlangeFor PrecisionMountingState-Of-The-Art Grating On The Fan Cover Delivers Maximum AirFlow For CoolingDouble Lip SealsOn Both EndsOf The MotorWith An AdditionalShaft SlingerOn The Drive EndStainless SteelPlugs Located Ata3, 9, & 12 O'ClockWith A StainlessSteel Drain PlugAt 6 O'ClockFully Gasketed Junction Box With Flanged Cover And Threaded Entrance ForMaximum SealingDouble ReinforcedAnd WeldedMounting BaseGrade 300 Stainless SteelConstructed Frames, Flanges,fEndbells, Fan Covers,fFastening Hardware, Junction Boxes,fJunction Box CoversAnd Mounting Bases

Explosion Proof Three-Phase Motors

Motors In Stock At Factory Or Below-Direct Prices!

u 1 HP - 250 HP u                                       T3C Temperature Code

u 3600, 1800 & 1200 RPM u                       Class I, Groups C & D;

u 208-230/460 Volt (1 HP - 100 HP)          Class II, Groups E, F & G

u 460 Volt (125 HP and Up) u                     EPACT Rated High Efficiency

Rock Crusher 100-500 HP 1800, 1200, 900 RPM TEFC Enclosures	Standard T Frame 1-500 HP 3600, 1800, 1200, 900 RPM TEFC Enclosures
Standard TC Frame 1-200 HP 3600, 1800, 1200 RPM TEFC Enclosures	Round Body and Footed Available (TCRD) 1-100 HP 1800, 1200 RPM TEFC Enclosures
Oil Well Pump 2-100 HP 1200 RPM TEFC Enclosures	Close-Coupled Pump (JM, JP Frames) 1-50 HP 3600, 1800 RPM TEFC Enclosures

Vertical Hollow Shaft 25-250 HP 1800 RPM WP1 Enclosures

Explosion Proof 1-200 HP 3600, 1800, 1200 RPM Explosion Proof Enclosures Class I, Groups C, D --- Class II, Groups E, F, G	C Face Explosion Proof 10-50 HP 1800 RPM Explosion Proof Enclosures Class I, Groups C, D --- Class II, Groups E, F, G
Fractional 56C Frame (Removable Base) 1/3 - 2 HP 3600, 1800 RPM TEFC Enclosures	Stainless Steel 56C Frame 1/3 - 2 HP 3600, 1800 RPM TEFC Enclosures
Single Phase 3 - 5 HP 3600, 1800 RPM Drip Proof Enclosures	Single Phase 1 - 5 HP 3600, 1800 RPM TEFC Enclosures
Permanent Magnet Direct Current 1/3 - 1/2 HP 1800 RPM TENV Enclosures	Permanent Magnet Direct Current 3/4 - 2 HP 3600, 1800 RPM TEFC Enclosures

Slide Bases for all motors

"C" Flange Kits for all motors	"D" Flange Kits for all moto

Bottom close or plunger type nozzle

We will supply this type of nozzle in several diameters.  Materials and nozzles compatible with your products are available, including PVC body nozzles.  Prices may vary.

Bottom close or plunger type nozzles.  Price $500a piece.

Several styles with hose barbs or sanitary fittings. Nozzles standard 6 mm to 12 mm

Standard product contact parts, silicone and stainless steel, EPDM, Viton, and Buna seals available.

If not in stock may take 4-6 weeks before shipment. 

Video of nozzle in action

Fowler Electronic Caliper, 6" / 150mm Range.

Stainless steel frame.
Large easy-to-read display.
Resolution: .0005"
Direct inch/metric conversion.
Absolute/incremental measurement.
4 way measuring.
Complete in case.

Availability: In stock.
Usually ships within 24 hours.

Quantities available

Price $55 shipping not included in the price

Storm digital calipers

Stainless steel caliper has easy-to-read digital display. Converts from inch to metric with push of a button.

Stainless steel caliper has easy to read digital display. Converts from inch to metric with push of a button. *6in. capacity *Measures inside outside depth and step *Plastic case

Price: $50.00

Stainless Steel Sheet

Used for building, cover for frames, fabrication, frames, structures, home projects, school projects, and more.

Multipurpose stainless steel 304, has superior resistance to moisture and acidic conditions.  It is strong and durable.   This type of stainless steel is widely used and can be welded, drilled, machined, and cut with the proper tools.

Available in most size rectangles or squares up to 10' long and 60" wide.  Most gauges available.

Lead times vary some in stock

Stainless Steel Angle

Used for brackets, braces, building, fabrication, frames, structures, cross members, home projects, school projects, and more.

Multipurpose stainless steel 304, 16 gauge, grade 3. 304 stainless steel has superior resistance to moisture and acidic conditions.  It is strong and durable.

This type of stainless steel is widely used and can be welded, drilled, machined, and cut with the proper tools.

Available in 1 ½” and 2” angle, 2, 4, 6, and 8 foot lengths and any reasonable gauge.

Lead times vary, some in stock

New KB ELECTRONICS, INC. MODEL: KBIC -120 VARIABLE SPEED DC MOTOR CONTROL.  Potentiometer and resistor not included but are available for a small charge. 

The KBIC-120 is a 115 VAC rated 9 Amps RMS @ 45C. The control is designed for 90 VDC PM, Shunt and AC/DC motors. It will control motors between 1/100-1/2 HP (1.0 HP w/aux. Heat sink) by inserting the proper Plug-in Horsepower Resistor®. Speed range is 50:1 with load regulation of 1%. Features include Auto Inhibit®, Voltage Following, MOV transient protection, 5K speed pot and trim pot adjustments for Min, Max, Accel, IR and CL. Options include Auxiliary heat sink, AC Line and Armature Fuse Kit, Barrier Terminal Board

  Price $70

Conveyor chain, conveyor belt

NPS is offering conveyor chain.  This type of belt is used on many types of conveyors including bottle conveyors.  Standard gray straight run chain or tan low friction belting.

4 1/2" gray conveyor chain, Table top flat surface conveyor chain for straight conveyors, price $12 per foot

7 1/2" gray conveyor chain, Table top flat surface conveyor chain for straight conveyors, price $17 per foot

10" gray conveyor chain, Table top flat surface conveyor chain for straight conveyors, price $32 per foot

Contact Neumann Packaging for pricing not listed or for information concerning parts.

Sprockets, wear strip, stands, controls, motors and gearboxes for conveyors available.

New cap tightening wheels for quill type cappers or spindle cappers.  4" diameter, 2" hole in middle, 1/2" thick.  Interchangeable with most in line cappers.  Used on capping machines to tighten caps.  Different durometers of rubber available, most common are 50 and 60, price varies with some durometers. $11 a piece.  Discount available for large orders.

PLC with operator interface both programmed with a proven program to operate an automatic overflow filling machine.  Must be wired in.  All documentation available.  Price $2,600 

Gravity, pressure, pump and piston filler controls available.

Contact us for details.

32~140。F

0~9.9kgF/㎠(0~990KPa)

4㎜ 6㎜ 8㎜ 10㎜ 12㎜

ⓐ ⓑ ⓒ ⓓ

＂ ＂ ＂ ＂ ＂ ＂

Home

NEUMANN PACKAGING SERVICES
1765 Pine Grove Drive, Asheboro, North Carolina 27205
Phone: 336-683-9834 /  Fax: 336-683-9833 / E-mail: neumannpack@triad.rr.com